What does F29 mean on Kenmore washing machine?
FdL or F29 Error code means: The door cannot unlock. Firmly press the door in the area of the door lock. Then touch and hold the Power button for at least 3 seconds.
What does Code F mean on Kenmore washer?
a component problem
The F indicates that the washer control detected a component problem. Since the door remained locked, your likely problem was with the drain pump or excessive suds preventing the washer from draining out the water properly. You should then be able to open the washer door and remove the wet laundry.
How do you reset a Kenmore High Efficiency?
How to Reset a Kenmore Elite HE Washer
- Press the “Stop” button twice, and then press the “Power” button. Video of the Day.
- Choose a wash cycle (e.g. “Normal”), and then choose your wash options (e.g. “Hot/Cold” or “Cold/Cold”).
- Press the “Start” button to complete the reset process and restart the washing machine.
What does F29 mean on a Whirlpool washer?
The Whirlpool washer F29 error means the door has failed to unlock for at least 6 unlock attempts. This problem is almost always caused by a failed door lock mechanism. You can try and reset the control by unplugging the washer for a few minutes and plugging it back in.
What does the code ie mean on a Kenmore washer?
problem with water fill
The IE code indicates that the washer detects a problem with water fill. Make sure that the hot and cold water supply faucets behind the washer are fully open. You can shut off the water supply faucets and check the inlet water screens on the back of the washer for debris or deposits.
How do I fix F5 on my Kenmore washer?
It goes through the wash cycle and then ends with an F5 error and recurring beeping alarm. The “lid locked” LED flashes as well. The only way to clear the codes is to unplug and let sit, and then plug back in.
What does F01 mean on a Whirlpool Duet washer?
failed electronic machine control board
The F01 indicates a failed electronic machine control board. This error code can sometimes be caused by a glitch or power surge through the electrical lines. You may be able to clear this code by unplugging the washer for 5 minutes. Be sure to unplug the washer before accessing internal components.
