How do I access my super hub settings?
How to enable modem mode on the Super Hub 1, 2 or 2ac
- Enter 192.168.0.1 into the address bar of your browser.
- The password is printed on the bottom of the Hub.
- Select Super Hub Settings to see the Modem Mode section.
- Select Enable Modem Mode.
- Select Yes to continue. The Super Hub will reboot and activate Modem Mode.
How do I access my virgin router settings?
In normal router mode you access the Virgin Media router settings by: Typing into your web browser (or by clicking on the link to the left) Entering the router settings password in the box shown on screen – you’ll find that password on a sticker on the base of the router.
What do Virgin hub lights mean?
White power light is on and WiFi light is flashing green This means the Hub is online and working. If you’re struggling to connect devices to the WiFi, make sure you’ve got the Hub’s correct network name and password. You can also check for problems in your postcode to find if there are any issues in your area.
What do the two green arrows mean on my virgin router?
If the Wi-Fi light is flashing green and is accompanied by a green power light, this signifies that the hub is on but the Wi-Fi isn’t connected. Next up, the internet light. The internet light shows up as two arrows going in opposite directions.
What lights should be on my Virgin Media Hub?
There are three indicator lights on the side of the Super Hub, each indicating different functions: Top – WAN (green/blue). Middle – Ready (green/blue). Bottom – WLAN (green/blue).
What are the two arrows on my router?
WPS stands for Wifi Protected Setup. It is a feature on many routers that allows for the fast and easy connection of a device to a router.
What does the green Wi-Fi symbol mean?
The internet light: This light will flash green when the Hub is acquiring a connection and will remain lit for two minutes after a connection has been established. It will also flash when the Hub is downloading new software. The Wi-Fi light: When the Hub 3.0 is booted up, the Wi-Fi symbol will stay on for two minutes.
How do I change the settings of the super hub?
Firstly, you will need to enter 192.168.0.1 into the address bar of your browser then follow the below steps: 1. Sign in to the settings page using the Hub’s Settings Password, the default Settings Password is printed on the bottom of the Hub 2. Read and acknowledge the security warning by selecting OK. Then select the Super Hub Settings icon. 3.
How do I access advanced settings on the Virgin Media super hub?
How to access advanced settings. To configure advanced settings on the Virgin Media Super Hub, do the following: 1. Take a look at the sticker on the back of the Super Hub and locate the web address under Super Hub Settings 2. Open a Web browser (e.g. Internet Explorer) and enter the address…
What does the purple button on Virgin Media super hub mean?
If the Virgin Media button is glowing a purple colour, it means that your Super Hub is in Modem Mode. On the rear of the Super Hub are four Ethernet ports, which can be used to make wired connections to computers and other devices on your network.
How do I change the modem mode settings on the hub?
*Enter If you have enabled Modem Mode on the Hub you will need to use 192.168.100.1 instead. When prompted, enter the settings password shown on the bottom of the Hub. Once you’ve accessed the page there are a variety of settings you can change.
